How to Design Network for WILKE Group?

Network Design for WILKE Group:

Network Design for WILKE Group:

Network Design for WILKE Group:

Frequently Asked Questions about DSL Routers:

Question: What is a DSL router?

Answer:  A Digital Subscriber Line router is a device used which is basically used to connect a computer with the internet using a phone line which provides DSL services.

Question: How DSL works?

Answer: The picture given below will explain the working of DSL:

Network Design for WILKE Group

Question: Can the optical fiber be used for DSL routers instead of telephone line?

Answer: Not at all. As phone line is necessary for DSL Connectivity as DSL routers need a line, optical fiber can’t produce DSL ability.

Question: Why my telephone line is unstable after installing DSL router?

Answer: That is a problem originating from telephone exchange so contact them. As there’s no impact on phone line service if you use DSL on it.

Question: How to set up your DSL router?

Answer: Please follow the following steps to connect to the internet through DSL router:

  1. Switch DSL router On.
  2. Locate WAN Port on the back of DSL Router and plug Phone Line into it.
  3. In Ethernet port of router, plug one end of LAN Cable
  4. In Ethernet port of your Computer, plug other end of LAN Cable
  5. Restart the computer
  6. Connect to the internet by click on Start button, clicking Control Panel, clicking Network and Internet, clicking Network and Sharing Center, clicking Set up a connection or network, and then clicking Connect to the Internet



E. Tittel & D. Johnson. (1998). A guide to Networking essentials. Cambridge.

J. Kurose. (2012). Computer Networking: A Top-Down Approach. Pearson Education.

LMinet RSS. (n.d.). How DSL Works. Retrieved from

MicrosoftTeam. (2014). Set up a DSL or cable connection. Retrieved from




Please enter your comment!
Please enter your name here